Wetblast Flex Compact
The Wetblast Flex Compact is the little brother of the proven Wetblast Flex. It is characterized, as the name suggests, by its compact design. The sturdy frame with forklift pockets and wheels make this device robust and mobile at the same time.
The Wetblast Flex can be used in different ways e.g. blasting with or without water supply or simple blowing off with air to clean workpieces from dust. For water supply for wet blasting, the unit is simply connected to an existing water pipe, the integrated pressure pump provides the necessary water pressure, so it is possible to bind the resulting blasting dust by water. The water is supplied to the abrasive-air mixture after the pot, thus reducing wear on the pot and eliminating the need for time-consuming cleaning of the pot after use.
Area of application |
Wet blasting / vapour blasting (dust free) Dry blasting Wash off |
Total dimension: W x H x D * |
1200 x 1100 x 1400 mm |
Minimum air pressure |
4 bar |
Maximum air pressure |
10 bar |
Air consumption |
5m³/min at 6bar (9,5mm nozzle) |
Water pressure |
0 - 4 bar |
Abrasive media |
for every common media |
Features |
Blast pot 100l (with cover and pressure regulator) Water pump W-92 with backflow preventer valve Abrasive cut off switch (double function) HMS water separator PT metering valve Tungsten carbide blast nozzle 9,5mm Blast hose 10m |
* +/- Values, may differ depending on configuration, arrangement and function.
